Whether you're designing a bathroom that's been modified for wheelchair access or you're looking for a more contemporary look, you can't go wrong with a linear shower drain. These drains were initially designed for commercial bathrooms but are now making their way into residential plumbing. Their versatility makes them a popular choice for many residential bathroom layouts.

Linear shower drains are designed to make the transition from the shower floor to the bath floor more smooth. They eliminate the need for a shower curb, a traditional step over a curb. This creates an easier transition for people in wheelchairs and wheelchair-bound people. They also eliminate the need for a tiled barrier between the shower floor and the shower wall.

Linear shower drains are also ADA-compliant, meaning that they are suitable for people who are disabled or have other health issues. These drains can be installed in both wall-mounted and floor-mounted showers. They are also available in one-, two-, and three-sided models. They're designed to accommodate both large and small format tiles, and they're available in a variety of finishes. They can also be matched to the tile in the bathroom and can be used as a replacement for a traditional shower curb.

Linear shower drains require more maintenance than conventional drains. They tend to gunk up over time and can be a pain to clean. You'll need to clean the trough and drain more frequently than a conventional drain. You may also need to remove more debris from the drain. If you decide to use a liner, it's important to measure the drain opening so that the liner will fit snugly. Once the liner is in place, you can fasten the liner to the base drain with bolts.

Linear shower drains can also be used to keep water inside the shower. This is particularly useful for people recovering from injury or illness. If the water level gets too high, you can extend the drain to the open space of the shower. This can also add extra assurance that the water won't overflow.



CY85 Factory Directly Sale stainless steel 304 Polished with Adapter linear slot drains

Material	All stainless steel 316 or 304.
Thickness	1.2mm for basement and 1.5mm for patterns.
Size in inch	24”,26”,28”,32”,36”,40”,48”,60” in length, the width is 3-3/8”.
Size in mm	600mm, 900mm, 1200mm, 1500mm in length the width is 85mm.
Outlet	40mm/ 50mm, vertical outlet and plastic siphon design.
Capacity	40L/min Additional outlets may be added to increase flow rate
Surface finished	Satin finished, Polished finished, golden finished and bronze finished.
Accessories	Lifting key and strainer including, adjust legs, Adapter and all else for options.
Customization	All size accepted by custom made.